| Anwendungsbereich | Werbeflächen, Anbringen von Platten, Kessel, Konsolen, Fassadenbau, Schwerlastbefestigungen, Heimdekoration, Maschinen, Metallkonstruktionen, Maschinenmontage, Schutzbarrieren, Schilder, Träger, Holzkonstruktionen auf Beton, Holzbearbeitung
| Stützen, Stahlträger, Geländer, Rohr-/Kabeltrassen, Unterkonstruktionen aus Holz oder Stahl, Schwerlastbefestigungen, Renovierungs- und Sanierungsarbeiten | Hochfeste Befestigungen
| Schwerlastbefestigungen | Bau, Schwerlastbefestigungen
|
| Montagehinweise | Simple assembly, function based on the principle of friction locking; force-controlled installation. Suitable for pre-positioned, push-through, and stand-off installation. For heavy loads. Very high permissible loads and small edge and axial distances. Pre-installation or with the bore of the attachment part, suitable for static or quasi-static loads. Two anchoring depths for optimal flexibility. Installation with minimal anchoring depth saves drilling effort and time. Installation with maximum anchoring depth for maximum permissible loads. This makes it particularly economical. Fastening of load-bearing applications in non-cracked concrete, safety barriers, fastening of panels, machines, boilers, signs, advertising spaces, etc. Fastening of wooden structures to concrete. Fire protection: The anchor meets the requirements of class A1. Suitable for non-cracked concrete. Medium to heavy loads in indoor and outdoor areas.
| Industrial Quality: Steel, galvanically zinc-plated, Option 7 with ETA and fire protection approval. The galvanization protects the steel from rust and extends the service life of the anchors. Suitable for professional anchoring of medium to heavy loads for e.g. supports, steel beams, railings, pipe/cable trays as well as substructures made of wood or steel. Also suitable for heavy-duty fastenings in the context of renovation and refurbishment work in and around the house. The heavy-duty anchor is suitable for high-performance pre-set, through-bolt and stand-off installations in non-cracked concrete (Option 7) as well as pressure-resistant natural stone. Fastening of signs, machines, boilers, signs, advertising fences, sprinkler systems, wooden structures to concrete, safety barriers, steel structures, balcony railings, etc. The available sizes you can choose from are M8, M10, M12 and M16, with the matching washers and nuts included. This anchor bolt with extensive approvals to meet building regulations complies, among other things, with international standards for fire protection.
Product Information Bolt Anchor, Wedge Anchor with ETA Approval Constructive fastenings in non-cracked concrete. Safety barriers. Fastening of sprinkler systems. Fastening of signs, machines, boilers, signs, advertising fences, etc. Fastenings of wooden structures to concrete Approvals ETA Fire protection Use for medium to high loads Suitable for non-cracked concrete Function according to the principle of friction; force-controlled installation Easy installation Use for static or quasi-static loads Fire resistant from R30 to R120 Application examples 1. DRILLING Check that the concrete is properly compacted and free of significant pores. Approved for processing in dry, damp and water-filled boreholes. Drill with impact or hammer drill. Drill with specified diameter and depth. 2. BLOWING OUT AND CLEANING Remove dust and drilling residue from the borehole. Use air pump and brush. 3. INSTALLING Insert the anchor into the borehole until the marking of the anchoring depth is flush with the surface of the attachment. Use a hammer if necessary. Suitable for pre-set and through-bolt installation. 4. TORQUE DURING ANCHORING Use a torque wrench to apply the installation torque. After installation, the effective anchoring depth, according to the ETA specifications, can be determined by means of the letter at the end of the bolt.
| | | |
| Lieferumfang | 20x Schrauben, 20x Muttern, 20x Unterlegscheiben
| Mutter, Unterlegscheibe
| 20 Schrauben, 20 Muttern, 20 Unterlegscheiben
| 50 Schrauben, 50 Muttern, 50 Unterlegscheiben
| Bolzen, Mutter, Unterlegscheiben |
Erstellt von TRUFL AIam April 4, 2025